U-HEAD PROP ATTACHMENT
MASONRY FORKS
Hire
Strong, compact and designed for temporary support work.
The masonry fork fits onto a standard adjustable prop, securely locating
timber or steel beams and spreading the supported load across a wider area.
The masonry fork fits onto a standard adjustable prop, securely locating
timber or steel beams and spreading the supported load across a wider area.
Holds timber or
steel support beams
Fits standard
adjustable props
Heavy-duty 4,000 kg
rated attachment
Perfect for
Timber Beam Support
Steel Beam Support
Floor Propping
Ceiling Support
Formwork Support
Temporary Works
WHY HIRE FROM
Buildcompound?
We supply well-maintained, professional equipment that’s ready to perform from the moment it arrives on site.
Every masonry fork is inspected before leaving our depot, ready to be incorporated into a properly designed temporary support arrangement.
RELIABLE EQUIPMENT
Every attachment is checked and maintained before hire.
FLEXIBLE HIRE OPTIONS
Daily, weekly and long-term hire to suit your project.
FAST LOCAL DELIVERY
We deliver across Yorkshire when you need us.
EXPERT ADVICE
Tell us about your support arrangement and we’ll help identify the equipment you may need.
SPECIFICATIONS
| Product | Masonry Fork / U-Head |
|---|---|
| Equipment Type | Adjustable Prop Attachment |
| Safe Working Load | Up to 4,000 kg* |
| Internal Gap | Approximately 120 mm |
| Width | Approximately 100 mm |
| Head Height | Approximately 100 mm |
| Weight | Approximately 4.7 kg |
| Material | Heavy-Duty Steel |
| Compatibility | Standard Adjustable Props |
| Beam Compatibility | Suitable for Timber or Steel Beams |
| Standards | Tested to BS 1139 and EN 74 |
| Hire Includes | One Masonry Fork Attachment |
*The stated rating applies to the attachment under the specified test conditions. The safe capacity of the complete arrangement may be lower and depends on the prop, beam, extension height, loading, support base and temporary-works design. Product specification
NEED A COMPLETE SUPPORT SYSTEM?
We have adjustable props, masonry forks and supporting equipment available to add to your hire.
FREQUENTLY HIRED TOGETHER
ADJUSTABLE PROPS
Provide the vertical support beneath each masonry fork.
TIMBER SUPPORT BEAMS
Distribute the supported load across multiple props.
SOLE BOARDS
Spread the prop load across a firm, suitable supporting surface.
PROP BRACING
Stabilise the temporary support arrangement where required by its design.
ABOUT THE MASONRY FORK
The masonry fork—also known as a U-head or forkhead—is a heavy-duty attachment designed to fit onto a standard adjustable steel prop.
Its U-shaped head holds a suitable timber or steel cross beam in position, helping distribute a supported load across a wider area or multiple props. It can be used in temporary support arrangements for floors, ceilings, formwork and structural alterations.
Masonry forks must always be installed as part of a properly assessed temporary-works system. The props must remain vertical and be positioned on firm, load-bearing surfaces with suitable sole boards and bracing where required.
FAQs
Is an adjustable prop included?
No. The masonry fork is supplied as an attachment only. Suitable adjustable props, sole boards and supporting beams can be added to your hire.
What does a masonry fork do?
It sits on top of an adjustable prop and holds a timber or steel beam in position. This allows a load to be distributed across a wider area or across several props.
How much weight can it support?
The attachment has a stated safe working load of up to 4,000 kg under specified conditions. However, the safe load of the complete system is determined by its lowest-rated component and the temporary-works design.
Does the prop height affect its capacity?
Yes. An adjustable prop’s safe capacity generally reduces as it is extended. The masonry fork’s height must also be included when calculating the overall support height.
Can it hold timber and steel beams?
Yes, provided the beam fits correctly within the fork and is suitable for the calculated load and span. The beam must be selected by a competent person.
Can it be used to support a load-bearing structure?
Potentially, but the entire temporary support arrangement must be professionally assessed. Structural or temporary-works engineering advice should be obtained for load-bearing applications.
NEED HELP CHOOSING?
Our team is here to help you find the right machine for your project.
Can I use it without bracing the props?
Not unless the temporary-works design confirms this is safe. Props may require lacing or bracing to prevent sideways movement and maintain vertical alignment.
What should the props stand on?
Props must stand on firm, level surfaces capable of supporting the imposed load. Suitable sole boards should normally be used to distribute the load.
Can it be used with any adjustable prop?
It is designed for compatible standard masonry or adjustable steel props. Compatibility should be confirmed before installation, and improvised connections must never be used.
Can you design the temporary support arrangement?
Build Compound supplies the hire equipment but does not provide structural or temporary-works design. A competent person or qualified engineer should specify the arrangement where required.
Can you deliver the equipment to site?
Yes. Build Compound provides local delivery across Yorkshire, subject to location and availability.
What should I do if the attachment is bent or damaged?
Do not use it. Isolate the item and contact Build Compound immediately. Hired attachments must not be straightened, welded, modified or repaired by the hirer.
READY TO GET STARTED?
Book your masonry fork attachments today.
- 01904944002
- HIRE@BUILDCOMPOUND.CO.UK